Lantronix SGX 5150 User Guide - Page 52
To View or Con Wireless Network QoS Settings, Using Web Manager, Using the CLI, Using XML
View all Lantronix SGX 5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
6: Network Settings Table 6-10 Adding or Deleting Wireless (wlan0) Network QoS Settings Adding or Deleting Wireless Network (QoS) Settings Delete Filter type MAC Address Network Ports Priority Description Click the checkbox to the left of any existing QoS filter to be deleted and click the Submit button. Select the filter type from the drop-down window: Mac Address Network Port Enter the MAC address, if the MAC Address filter type is selected. Enter the Network, if the Network filter type is selected. Enter the Port, if the Port filter type is selected. Select the priority of the filter from the drop-down menu. To View or Configure Wireless Network QoS Settings Using Web Manager To view Wireless (wlan0) QoS statistics, click Network on the menu and select Wireless Network > QoS. To modify Wireless (wlan0) QoS information, click Network on the menu and select Wireless Network > QoS > Configuration. Using the CLI To enter the wlan0 QoS command level: enable > config > if 2 > qos Using XML Include in your file: Wireless (wlan0) Network Failover The SGX 5150 device gateway provides wlan0 failover, in the form of a "dead remote host reachability" mechanism (essentially a ping against a known host). If the remote host is determined to be not reachable, the device will failover to the Ethernet interface. If the remote host is determined to be reachable, the device will failback to the Wi-Fi interface. Settings State Failover Interface Hostname Ping Protocol Timeout Interval Failover Threshold Table 6-11 Wireless (wlan0) Network Failover Description Click to enable or disable state. Always select eth0 in the SGX 5150 device gateway. Enter the remote host to test reachability. Select ICMP or TCP based ping. Indicate the interval to wait for ping response from remote host. Indicate the interval in which to test reachability Indicate the allowed number of failed pings - after which the device will failover to the wlan0 interface. SGX 5150 IoT Device Gateway User Guide 52