Lantronix SGX 5150 User Guide - Page 47
To View and Con Wired Network QoS Settings, Using Web Manager, Using the CLI, Using XML, Wired
View all Lantronix SGX 5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
6: Network Settings Wired (eth0) Network Settings Network Ports Priority Description Enter the Network, if the Network filter type is selected. Enter the Port, if the Port filter type is selected. Select the priority of the filter from the drop-down menu. To View and Configure Wired Network QoS Settings Using Web Manager To view Ethernet (eth0) QoS statistics, click Network on the menu and select Wired Network > QoS. To modify Ethernet (eth0) QoS information, click Network on the menu and select Wired Network > QoS > Configuration. Using the CLI To enter the eth0 QoS command level: enable > config > if 1 > qos Using XML Include in your file: Wired (eth0) Network Failover The SGX 5150 device gateway provides WAN network failover, in the form of a "dead remote host reachability" mechanism (essentially a ping against a known host). If the remote host is determined to be not reachable, the device will failover to the Wi-Fi interface. If the remote host is determined to be reachable, the device will failback to the Ethernet interface. Table 6-6 Wired (eth0) Network Failover Settings Wired Network (Failover) Settings State Failover Interface Hostname Ping Protocol Timeout Interval Failover Threshold Failback Threshold Description Click to enable or disable state. Always select wlan0 in the SGX 5150 device gateway. Enter the remote host to test reachability. Select ICMP or TCP based ping. Indicate the interval to wait for ping response from remote host. Indicate the interval in which to test reachability Indicate the allowed number of failed pings - after which the device will failover to the wlan0 interface. Indicate the number of successful pings - after which the device will failback to the Ethernet interface. SGX 5150 IoT Device Gateway User Guide 47