Lantronix SGX 5150 User Guide - Page 79

9: Administration To View and Configure Basic CLI Settings Using Web Manager  To view CLI statistics, on the Administration page, click CLI > Statistics.  To configure basic CLI settings, on the Administration page, click CLI > Configuration. Using the CLI  To enter CLI command level: enable > config > cli Using XML  Include in your file: Clock You can view current clock settings at the bottom of the screen, and also either manually update or synchronize the clock with an SNTP server. If you select SNTP, you can choose automatic time zone detection. Bridge Fields Method Date Time NTP Server Time Zone Table 9-4 Clock Settings Description Select Manual or SNTP from the drop-down window. If Manual method is selected, enter the date using the Year, Month and Day drop down menus that become available. If Manual method is selected, enter the time using the Hour, Minute (Min) and Second (Sec) drop down menus that become available. If SNTP method is selected, the clock will keep time synchronized with the NTP Server by default. Enter an alternative NTP server if you wish to use an address other than the default. Select the desired Time Zone from the drop-down menu based on geographic location. The time zones listed are in Universal Time Coordinated (UTC), formerly known as Greenwich Mean Time (GMT). Syslog and other applications may use UTC. The UTC Offset of the form HHMM (H = hour, M = minute) is applied to the UTC time to get the local time. The device will make seasonal time changes required for Daylight Savings Time. To Specify a Clock-Setting Method Using Web Manager  To view or configure basic Clock settings, on the Administration page, click Clock. Using the CLI  To enter Clock command level: enable > config > clock Using XML  Include in your file: SGX 5150 IoT Device Gateway User Guide 79