Lantronix SGX 5150 User Guide - Page 82
Using XML, Gateway, Status, WAN
View all Lantronix SGX 5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Using XML Include in your file: 9: Administration Gateway The SGX 5150 IoT device gateway can be configured as a wireless router with DHCP server functionality. Status This page displays the current configuration and statistics information for the gateway. To view gateway status: click Gateway on the menu and select Status. WAN Gateway Settings Operating Mode Firewall MAC Address filter Interface IPv6 State IP Address IPv6 Address Primary DNS Secondary DNS Table 9-8 WAN Configuration Description Select the type of operating mode: Disabled: prevents the device to be used as a gateway; use the device normally. Gateway: allows the device to be used as a router with NAT. Router: allows the device to be used as a router without NAT. Select to enable or disable firewall: Enabled: enables the device firewall. Disabled: disable the device firewall. Select to enable or disable the MAC address filter. Specify the WAN interface. Generally wlan0 interface. Select to enable or disable the IPv6 state. Assign a static IP address to the gateway. Assign a static IPv6 address to the gateway. Enter the IP address of the primary Domain Name Server. Note: This setting will be used when either Static IP or Auto IP is active, or if DHCP/BOOTP is active and no DNS server was acquired from the server. Enter the IP address of the secondary Domain Name Server. Note: This setting will be used when either Static IP or Auto IP is active, or if DHCP/BOOTP is active and no DNS server was acquired from the server. SGX 5150 IoT Device Gateway User Guide 82