Lenovo PC 300PL User guide for IBM PC300PL (type 6584, 6594) systems - Page 126
Go to IBM Enhanced
View all Lenovo PC 300PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Code 177 184 186 187 190 20x 301 or 303 601 602 Description An inventory violation occurred, such as a hardware component was removed. This error message is part of the Asset ID feature of the computer. Asset control antenna not detected. System board or hardware security error The administrator password and startup sequence has been cleared. The computer chassis-intrusion detector was cleared. This is an informational message. Memory error Keyboard error Diskette drive or controller error Diskette IPL startup (boot) record not valid Action Type in the administrator password. If the problem persists, have the computer serviced. Have the computer serviced. Have the computer serviced. Go to Chapter 4, "Using the Configuration/Setup Utility program" on page 37 and follow the instructions to set an administrator password and the startup sequence. No action is required. Go to "IBM Enhanced Diagnostics program" on page 126 for instructions about running diagnostics. 1. Make sure the keyboard is properly connected. 2. If the keyboard is properly connected, have the computer serviced. 1. Go to "IBM Enhanced Diagnostics program" on page 126 and if possible follow the instructions to run the IBM Enhanced Diagnostics program. 2. If the problem persists, have the computer serviced. 1. The diskette might be defective. Try another diskette. 2. If the problem persists, have the computer serviced. 112 PC 300PL User Guide