Lenovo PC 300PL User guide for IBM PC300PL (type 6584, 6594) systems - Page 57
Using an administrator password
![]() |
View all Lenovo PC 300PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Using an administrator password Important If enhanced security is enabled, keep a record of your administrator password in a secure place. If you forget or lose the administrator password, you must replace the system board in order to recover. Setting an administrator password deters unauthorized persons from changing configuration settings. If you are responsible for maintaining the settings of several computers, you might want to set an administrator password. After you set an administrator password, a password prompt appears each time you try to access the Configuration/Setup Utility program. If you type the wrong password, you receive a message. If you type the wrong password three times in succession, you must turn the computer off and start again. If both a power-on and administrator password are set, you can type either password. However, in order to change any settings, you must use your administrator password. If you enter the power-on password, you will only be able to view limited information. Setting, deleting, or changing an administrator password An administrator password can be any combination of up to seven characters (A-Z, a-z, and 0-9). To set, change, or delete an administrator password: 1. Start the Configuration/Setup Utility program (see "Starting and using the Configuration/Setup Utility program" on page 37). 2. From the Configuration/Setup Utility program menu, select System Security and press Enter. 3. Select Administrator Password and press Enter. You will be warned that if you forget your administrator password, you will have to replace your system board. Press Enter to continue. 4. To delete an administrator password, select Delete Administrator Password and go to step 9 on page 44. 5. To set an administrator password, type your password, press Down Arrow (↓), and type your password again. 6. At Power-On Password Changeable by User, select Yes or No. Press Left Arrow (←) or Right Arrow (→) to toggle between selections. (If you select Yes and an administrator password is set, the power-on Chapter 4. Configuration/Setup Utility program 43
![](/manual_guide/products/lenovo-pc-300pl-user-guide-ibm-pc300pl-type-6584-6594-systems-6eacf41/57.png)