Lenovo PC 300PL User guide for IBM PC300PL (type 6584, 6594) systems - Page 89
What to do next
![]() |
View all Lenovo PC 300PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
10. Attach the signal cable connector to the IDE connector on the riser card. Note: See "Locating components on the riser card" on page 65 for an illustration showing the locations of the connectors on the riser card. 11. Attach all cables to the drive. Note: If you install more than one drive, attach cables to the lowest drive first and work your way up. Power Cables 12. Rotate the drive cage back. Signal Cables What to do next: Go to the device-record form in Appendix B, "Computer records" on page 147 and record the new installation. To work with another option, go to the appropriate section. To replace the cover, go to "Replacing the cover and connecting the cables" on page 76. Chapter 5. Installing options 75
![](/manual_guide/products/lenovo-pc-300pl-user-guide-ibm-pc300pl-type-6584-6594-systems-6eacf41/89.png)
10.
Attach the signal cable connector to the IDE connector on the riser card.
Note:
See “Locating components on the riser card” on page
65 for an
illustration showing the locations of the connectors on the riser
card.
11.
Attach all cables to the drive.
Note:
If you install more than one drive, attach cables to the lowest
drive first and work your way up.
Power
Cables
Signal
Cables
12.
Rotate the drive cage back.
What to do next:
±
Go to the device-record form in Appendix
B, “Computer records”
on page
147 and record the new installation.
±
To work with another option, go to the appropriate section.
±
To replace the cover, go to “Replacing the cover and connecting the
cables” on page
76.
Chapter 5.
Installing options
75