Lenovo ThinkPad 300 Service Guide - Page 21
Message, Solution, Saving, Changes, Restart
View all Lenovo ThinkPad 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Message 0280: Previous boot incomplete Solution Your computer was previously unable to complete the boot process. Turn the computer off; then turn it on to start the BIOS Setup Utility. Verify the configuration and then restart the computer either by choosing the Exit Saving Changes option under the Restart item or by pressing F10. If you still see the same error code, have the computer serviced. 1802: Unauthorized network card is plugged in - Power off and remove the miniPCI network card. The Mini-PCI network card is not supported on this computer. Remove it. 1803: Unauthorized daughter card is plugged in - Power off and remove the daughter card. The daughter card is not supported on this computer. Remove it. 1830: Invalid The current memory configuration is not supported. If only memory one memory module is installed, it must be in SLOT-0, not in configuration - SLOT-1. Power off and install a memory module to Slot-0 or the lower slot. 2100: Initialization error on HDD0 (Main hard disk drive) The HDD or SSD is not working. Have the drive serviced. 2102: Initialization error on HDD1 (Ultrabay hard disk drive) The HDD or SSD is not working. Have the drive serviced. 2110: Read error on HDD0 (Main hard disk drive) The HDD or SSD is not working. Have the drive serviced. 2112: Read error on HDD1 (Ultrabay hard disk drive) The HDD or SSD is not working. Have the drive serviced. Chapter 3. Solving computer problems 13