Lexmark Forms Printer 2491 User's Guide - Page 120
Testing the printer, Running the printer test, Hex Trace mode, LineFeed, Tractor - international drivers
View all Lexmark Forms Printer 2491 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Testing the printer Each time you turn the power switch On, the printer performs an internal check, or Power-On Self Test. Running the Printer Test produces a test printout that gives a visual indication of any problem the printer may be experiencing. You can run the Printer Test with or without the printer being connected to your computer. Running the printer test 1 Make sure paper and the ribbon cartridge are installed. 2 Turn the printer Off. 3 Press and hold LineFeed while you turn the printer On. 4 Release LineFeed when printing starts. Printing continues until you stop the printer. Hex Trace mode Hex trace mode prints the control codes that are sent to the printer. Use trace mode to help diagnose software/driver problems. To enter trace mode: 1 Make sure paper and the ribbon cartridge are installed 2 Turn the printer Off. 3 Press and hold Tractor while you turn the printer On. 4 Release Tractor when the lights go out. 5 Turn the printer Off and back On to exit this mode. 116 Troubleshooting