Lexmark Forms Printer 2491 User's Guide - Page 146
Maintenance, Removing the ribbon cartridge, Cleaning the printer, Cleaning the inside of the printer:
View all Lexmark Forms Printer 2491 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Maintenance This section describes how to remove the ribbon cartridge and clean the printer. Removing the ribbon cartridge 1 Turn the printer Off. 2 Remove the ribbon access cover. 3 Set the forms thickness lever to position 7. 4 Squeeze the left and right latches on the ribbon cartridge and lift. The cartridge unlatches from the printer carrier. Cleaning the printer Before you clean the printer: 1 Turn the printer Off. 2 Unplug the power cord. 3 Wait until the printhead is cool. 4 Remove the ribbon cartridge. Cleaning the inside of the printer: Every few months, use a soft brush and a vacuum to remove dust, ribbon lint, and pieces of paper. Vacuum any dust from around the printhead and in the printer cavity. Cleaning the cover: Clean the outside of the printer with a damp cloth and mild soap. Do not use any spray-type or chemical cleaners anywhere on your printer. Do not put any liquids or spray near the air vents. For stubborn ink stains on the cover, use a commercial mechanic's hand cleaner. 142 Troubleshooting