Lexmark M410 Service Manual - Page 35

4045-XXX User Error Messages User Error Message Explanation 200 Paper Jam Remove Cartridge Paper is jammed at the printer Input Sensor. Open the printer's upper front door and remove the print cartridge to access the paper jam area. 201 Paper Jam Remove Cartridge Paper is jammed between the printer's input and exit sensors. Open the printer's upper front door and remove the print cartridge to access the jam area. 202 Paper Jam Open Rear Door Paper is jammed at the printer exit sensor. Open the printer rear door to access the jam area. 203 Paper Jam Short Paper Paper stops behind the rear door when feeding to the top output bin. Paper or envelopes that are shorter than 6.2 inches (157.5 mm) in length must exit through the rear exit. 250 Paper Jam Check MP Feeder Paper is jammed in the multipurpose feeder. Insert Cartridge or Close Door This message displays when the printer's front door is open or the print cartridge is missing. If this message cannot be cleared go to "Cover Open Switch/Cable Service Check" on page 2-19. 34 Short Paper The printer determines the paper length is too short to print the formatted data. This occurs when the printer does not know the actual paper size loaded in the tray. For auto-size sensing trays, this error occurs if the paper stop is in the incorrect position. Make sure the Paper Size setting is correct for the size paper that is being used. 35 Res Save Off Deficient Memory This message displays when the printer has insufficient memory to enable Resource Save. Modification of user settings that use memory can cause this error. 37 Insufficient Collation Memory This message is displayed when the printer memory used to store pages is too full to collate the print job. 38 Memory Full This message is displayed when the printer memory used to store pages is full. Diagnostic Information 2-9