Lexmark M410 Service Manual - Page 98
Sensor Monitor Test, To run the Sensor Monitor Test
UPC - 734646261005
View all Lexmark M410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
4045-XXX Sensor Monitor Test This test lets you monitor signals from all photo sensors and switches in the printer. While each sensor/switch is actuated, the operator panel displays a value of opened or closed. To run the Sensor Monitor Test: 1. Select Sensor Monitor from the menu. 2. Toggle or actuate each sensor/switch. The second row of the operator panel displays the signal status. Only the first six positions of the second row are used in this test. Check the corresponding position on the operator panel with the table for the correct signal status. Sensor/Switch MPF Paper Present Sensor Display Position 1 Paper Input Sensor 2 Paper Exit Sensor 3 Cover Open/Cartridge 4 Present Switch Rear Door Open Sensor 5 Tray 2 Attached 6 Signal Status o = No paper is present 1 = Paper is present o = No paper is present. 1 = Paper is present o = No paper is present. 1 = Paper is present O = Cover is open and/or cartridge is missing. C = Cover is closed and cartridge is present. O = Rear door is open. C = Rear door is closed. o = Tray 2 is not (correctly) attached to printer. 1 = Tray 2 is attached to printer. 3-24 Service Manual