Netgear RN528X Software Manual - Page 96
Set Up Initiator Access, ReadyNAS OS 6.7
View all Netgear RN528X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
ReadyNAS OS 6.7 1. Set up iSCSI initiator access to the LUN group. See Set Up Initiator Access on page 96. 2. Initialize and format LUNs in the LUN group. See Initialize and Format LUNs on page 101. Set Up Initiator Access The following procedure uses the Microsoft iSCSI Software Initiator, which is freely available online and is integrated in Windows 7 and later. Note If you use an operating system other than Windows, the steps are different, but the basic tasks remain the same. Note Some of the steps in this procedure require that the Windows iSCSI service is running. If it is not, when you open the iSCSI initiator, Windows asks if you want it started. To set up initiator access: 1. Open the iSCSI initiator and click the Configuration tab. 2. Copy the default name from the Initiator Name field. 3. Create an iSCSi initiator on the ReadyNAS: LUNs 96