Panasonic DMR-HW100EBK Operating Instructions - Page 78

Convenient functions Changing the unit's settings (Setup) Others Setup Others Others Standby Settings Remote Control Clock Owner ID PIN Entry System Update System Information DivX Registration Initialize ∫ Standby Settings Others Standby Settings Enlgish Standby Settings Power Save in Standby Automatic Standby Automatic Standby after OTR Automatic Standby after Copy RF OUT ( Aerial Signal ) Enlgish Enlgish ¾ Power Save in Standby On On Timer Off It will go into the "Power Save in Standby" mode. "Power Save in Standby" is activated when the set time comes. ≥If the clock has not been set, "Power Save in Standby" is activated at all hours. It is possible to start quickly from the standby mode. (Quick Start mode) ≥This function cannot be enabled when the DLNA function is enabled in "Home Network ( DLNA ) Server function". (> 77) ≥The setting may be changed to "Off" automatically when the setting for video communication is changed. (> 61) ¾ Automatic Standby Set the time to turn the unit to standby mode automatically. After the unit has finished operating, the unit will be turned to standby mode once the set time has passed. ≥When "REWIND LIVE TV" is set to "On" (> 73), "Off" cannot be selected. ¾ Automatic Standby after OTR If "On" is selected, this unit is turned to standby mode when it is not operated for approximately 5 minutes after completing "Automatic Stop" or "Recording Time" (> 27). ¾ Automatic Standby after Copy If "On" is selected, this unit is turned to standby mode when it is not operated for approximately 5 minutes after completing copy. (> 59, 60) ¾ RF OUT ( Aerial Signal ) Set whether to output the aerial signal or not from RF OUT while in standby mode (when "Power Save in Standby" is activated). ≥If "On" is selected, the aerial signal is output from this unit. ∫ Remote Control Change the remote control code on the main unit and the remote control if you place other Panasonic products close together. ≥Use "Set Code 1", the factory set code, under normal circumstances. 1 Select the code, then press [OK]. 2 While pressing [OK], press and hold the number button ([1] to [6]) for more than 5 seconds. 3 Press and hold [OK] for more than 5 seconds. 4 Press [OK]. ≥Operation is possible only with Panasonic remote controls with "IR6" printed at the bottom when the remote control code of this unit is set to "Set Code 4", "Set Code 5" or "Set Code 6". HDD RECORDER IR6 HDD RECORDER IR6 IR6 78 VQT3F57