Panasonic DMR-HW100EBK Operating Instructions - Page 87
Troubleshooting
View all Panasonic DMR-HW100EBK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Troubleshooting U76 ¾ HDMI cannot be output because it is connected to a model that does not support copyright protection. U99 ¾ The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby mode. Now press [Í/I] on the main unit again to turn the unit on. Hor F stands for a number.) ¾ There is something unusual. (The service number displayed after H and F depends on the unit's condition.) ¾ Check the unit using the troubleshooting guide (> 88). If the service number does not disappear, do the following. 1. Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it. 2. Press [Í/I] to turn the power on. (The unit may be fixed.) If the service number does not disappear despite after doing the above, request service from the dealer. Inform the dealer of the service number when requesting service. X HOLD ¾ The HOLD function is activated. Press and hold [OK] and [BACK/RETURN ] at the same time until "X HOLD" disappears. (> 20) 87 VQT3F57