Panasonic HC-X1000 HC-X1000 Advanced Features Manuals (English) - Page 40

∫ To emphasize the outline of images Setting [EVF/LCD DETAIL] to [ON] helps you achieve focus easier by emphasizing the outlines of an image displayed on the LCD monitor and viewfinder. You can also adjust the emphasis level or change the frequency. ≥ You can also enable or disable this function with the applicable USER button. (l 61) ≥ These settings will not affect the images actually recorded. MENU : [DISP SETUP] # [EVF/LCD DETAIL] # [ON] Adjusting the level of [EVF/LCD DETAIL] 1 Select the menu. MENU : [DISP SETUP] # [EVF/LCD PEAK LEVEL] 2 Touch / to adjust settings. 3 Touch [ENTER]. ≥ Touch [EXIT] to exit the menu screen. Setting the peaking frequency of [EVF/LCD DETAIL] MENU : [DISP SETUP] # [EVF/LCD PEAK FREQ.] # [HIGH] or [LOW] ≥ [EVF/LCD DETAIL] is canceled in following cases: j If you use Focus Assist (l 40) Push AF When using Manual Focus, you can temporarily use Auto Focus by pressing the PUSH AF button. 1 Set this unit to Manual Focus. (l 39) 2 Press and hold the PUSH AF button. ≥ The focus position will be automatically adjusted for the subject at the center of the screen. ≥ If you set [AREA MODE] to [FOCUS], [FOCUS/IRIS] or [FOCUS/Y GET] and use Area Mode, the focus position will be automatically adjusted to the subject you have touched. (l 68) ≥ It will be canceled when the button is released. ≥ The focus position set by the Push AF will be maintained when canceled. ≥ Push AF does not work in following cases: j In Intelligent Auto Mode j When the FOCUS A/M/¶ switch is set to [A] j When a remote control (commercially-available) is connected (l 6) Focus Assist You can use Focus Assist by registering [FOCUS ASSIST] to a USER button. ≥ This function is registered to the USER5 button by default. ≥ Please refer to page 61 for details about setting the USER button. - 40 -