Panasonic HC-X1000 HC-X1000 Advanced Features Manuals (English) - Page 47
To set ATW Lock, To finely adjust the White Balance
View all Panasonic HC-X1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
*1 This mode is used for Auto White Balance Mode and Intelligent Auto Mode. *2 You can set this mode with a USER button. *3 Only displayed when Manual White Balance Mode is in use. ≥ To return to Auto White Balance Mode, press the W.B. button or set this unit to Intelligent Auto Mode using the iA/MANU switch. ∫ To set ATW Lock You can set ATW Lock by registering [ATW LOCK] to a USER button. ≥ Please refer to page 61 for details about setting the USER button. 1 Set the White Balance mode to [ATW]. ≥ If a mode other than [ATW] is set, press the W.B. button. 2 Press the USER button to which [ATW LOCK] is registered or touch the applicable USER button icon. ≥ To cancel ATW Lock, press the USER button or touch the USER button icon again. Canceling ATW Lock will return the White Balance mode back to [ATW]. ≥ ATW Lock is not available except when the White Balance mode is set to [ATW]. ≥ It will be canceled when the unit is turned off. ∫ To finely adjust the White Balance It is possible to adjust the White Balance in increments of 100K. A value between P2400K and P9900K can be set. ≥ Use the multi-function dial to change the settings. ≥ Switch to Manual Mode. (l 34) 1 Set the White Balance mode to [VAR]. (l 46) 2 Push the multi-function dial. 3 Rotate the multi-function dial to adjust the color balance. 4 Push the multi-function dial to finish the adjustment. ∫ To set the White Balance in accordance to the recording scene 1 Fill the screen with a white subject or place a white piece of paper in front of the lens. 2 Set the White Balance mode to [Ach] or [Bch]. (l 46) 3 Press and hold the W.B. button or the multi-function dial to start adjusting the White Balance. ≥ The screen goes dark momentarily, "WB SET OK" is displayed, and the adjustment ends. ≥ When the mode of White Balance is set to something other than [Ach] or [Bch], the Black Balance adjustment is performed by pressing and holding the W.B. button or the multi-function dial. Setting is completed when the screen goes black momentarily and "BB SET OK" is displayed. ≥ When the White Balance/Black Balance cannot be performed, an error message "WB SET NG" or "BB SET NG" is displayed on the screen. In such case, use other mode. ≥ Settings assigned to [Ach] or [Bch] can be finely adjusted in [COLOR TEMP A ch]/[COLOR TEMP B ch]. (l 134) ≥ The contents previously set are maintained in the [Ach] or [Bch]. Perform the setting again when the recording condition has changed. - 47 -