Panasonic HC-X1000 HC-X1000 Advanced Features Manuals (English) - Page 94
Using this unit as a card reader, If using Windows, Operating environment mass storage
View all Panasonic HC-X1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
6 Touch [PC] on the screen of this unit. ≥ This unit is automatically recognized as an external drive of the PC. (l 96) ≥ When you select an option other than [PC], reconnect the USB cable. ≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor on. ≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.) ≥ When performing reading/writing between a PC and an SD card, be aware that some SD card slots built into PCs and some SD card readers are not compatible with the SDHC Memory Card or SDXC Memory Card. ≥ When using an SDXC Memory Card, check the following support site. http://panasonic.net/avc/sdcard/information/SDXC.html About the screen indication of the unit ≥ Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or card access icon ( ) appears on the unit screen. ≥ If the screen does not change when the unit is operated while connected to a PC, disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect the battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit back on. (Data may be destroyed when above operation is performed while accessing the SD card.) Using this unit as a card reader When this device and a computer for editing are connected using a USB Connection Cable, image data in the SD card can be copied. ≥ Concerning non-linear editing, refer to the instruction manual of your editing software. Operating environment (mass storage) To use this unit as a card reader, you need a PC that meets the following system requirements. ≥ Even if the system requirements mentioned in this owner's manual are fulfilled, some PCs cannot be used. ≥ The USB equipment operates with the driver installed as standard in the OS. ∫ If using Windows ≥ Operation is not guaranteed in the following cases. j Operation on an upgraded OS. j Operation on an OS other than the one pre-installed. OS CPU RAM Interface Other requirements Windows 8/Windows 8.1 (32 bit/64 bit) Windows 7 (32 bit/64 bit) SP1 1 GHz or higher 32-bit (k86) or 64-bit (k64) processor (including compatible CPU) 2 GB or more (64 bit)/1 GB or more (32 bit) USB port Mouse or equivalent pointing device - 94 -