Philips DVDR615 User manual - Page 16

English Connecting to Additional Devices Using the input sockets (IN-EXT 1 or IN-EXT2) Connecting a Satellite Receiver/ Cable Box 1 If your Satellite Receiver/Cable Box has only a single antenna output (RF OUT or TO TV,) use the antenna cable to connect it with the ANTENNA input jack at the back of the DVD recorder. You can connect a video cassette recorder (VCR,) DVD player, decoder, satellite receiver or cable box to the input jacks at the back of the DVD recorder (IN-EXT 1 or IN-EXT 2.) The possible connection is depending on the capabilities of the additional devices. Switching between S-Video input and Video (CVBS) input takes place automatically. If both are used for connecting to external devices, the signal from S-Video socket has priority. The COMPONENTVIDEO (IN-EXT1) jacks are designed only for 'interlaced' signals. Progressive Scan input signals cannot be processed by the DVD recorder. Satellite Receiver/ Cable Box 2 For complete connection to your TV set, see pages 11~15 for details. G Alternatively, you can connect it to the VIDEO (CVBS) (or S-VIDEO (Y/C)) and AUDIO L/R input jacks at the back of the DVD recorder if your Satellite Receiver/Cable Box has the same output jacks. ➜ To watch/record the programs, press TUNER on the remote control, then press 3 4 to select 'EXT1' as the input channel. Satellite Receiver/ Cable Box INT IN TO TV VIDEO AUDIO OUT OUT R L CH3 CH4 16 DVDR610_615_37_Engfinal434 16 8/16/04, 4:04 PM 3139 246 14221