Philips DVDR615 User manual - Page 27
SYSTEM-MENU, Set-up, Analog, VCR Plus, alphanumeric, keypad 0-9, Connection, Cable, Antenna - reset
UPC - 037849945629
View all Philips DVDR615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
English Installing the DVD Recorder (cont'd) Setting up VCR Plus+® channels You need to program the DVD recorder with your local channel information before you can use VCR Plus+® programming system. 1 Press SYSTEM-MENU. ➜ The system menu appears on the TV. 2 Press 4 repeatedly to select { Set-up .} 3 Press 2 repeatedly to select { Analog Ch.} 4 Press 4 repeatedly to select { VCR Plus+ Ch. } and press 2 to confirm. 5 Press 3 4 to select a VCR Plus+® channel number and press 2 to confirm. VCR Plus+ Ch. 001 . . . 002 . . . 003 . . . 004 . . . 005 . . . 006 . . . 007 . . . ➠ 002 1 . . 6 Press 3 4 to select the VCR Plus+® TV channel or use the alphanumeric keypad 0-9, then press 1 to confirm. ➜If you use the alphanumeric keypad 0-9, enter the channel number as a three-digit number. For example, for channel 18, press 0, 1, 8. ➜ Refer to the list from your local newspaper or TV guide for the VCR Plus+® channel numbers for your area. These are the numbers you will enter as the channel number as you complete the selection. 7 Repeat steps 5~6 to search for other TV channels. Selecting the channel input signal The DVD recorder will detect whether you connected an Antenna or Cable TV signal. If you are not receiving the correct channels, you can use this function to select the type of connection you are using and allow the DVD recorder to reset the channels. 1 Press SYSTEM-MENU. ➜ The system menu appears on the TV. 2 Press 4 repeatedly to select { Set-up .} 3 Press 2 repeatedly to select { Analog Ch.} 4 Press 4 repeatedly to select { Connection } and press 2 to confirm. 5 Press 3 4 to select the connection the TV is using. ➜ { Auto } : Select this to enable the DVD recorder to detect the input signal automatically. ➜ { Cable } : Select this if you connected a cable signal. ➜ { Antenna } : Select this if you connected an antenna signal. 6 Press OK to confirm. ➜ The TV channel search starts. TIPS: Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu. 27 DVDR610_615_37_Engfinal434 27 8/16/04, 4:05 PM 3139 246 14221