Pioneer AVH-4000NEX Owners Manual - Page 51
Touch [Beep Tone] repeatedly until
View all Pioneer AVH-4000NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Selecting the system language The system language can be selected. The language can be changed for the following: - The "Audio" screen - The "System" screen - The "Video Setup" screen - The "Bluetooth" screen - Language for messages Some operations on this product are prohibited from use while driving or require careful attention when operated. In such cases, a caution message will appear on the display. You can change the language for caution messages with this setting. If the embedded language and the selected language setting are not the same, text information may not display properly. Some characters may not be displayed properly. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [System Language]. The pop-up menu appears. 4 Touch the desired language. After the language is selected, the previous screen returns. Setting the keyboard language with the application for iPhone You can use the keyboard in AppRadio Mode by setting the language of the keyboard for iPhone. p This function is only available in AppRadio Mode on the iPhone. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [Keyboard]. The "Keyboard" screen appears. 4 Touch the desired language. After the language is selected, the previous screen returns. Setting the beep sound 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [Beep Tone] repeatedly until the desired setting appears. On (default): Sounds a beep. Off: Does not sound a beep. Adjusting the response positions of the touch panel (touch panel calibration) If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel screen. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. p Do not use sharp pointed tools such as a ballpoint or mechanical pen, which could damage the screen. p Do not turn off the engine while saving the adjusted position data. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. Chapter 1 Display the screen you wish to adjust. 22 2 Press the HOME button to display the Top menu screen. 3 Touch the following keys in the following order. English The "System" screen appears. 3 Touch [Touch panel calibration]. The touch panel adjustment screen appears. 4 Touch two corners of the screen along the arrows, and then touch the centers of two + marks at the same time twice. 5 Press the HOME button. The adjustment results are saved. 6 Press the HOME button once again. Proceed to 16-point adjustment. If you press and hold the HOME button, the adjustment is canceled. 7 Gently touch the center of the + mark displayed on the screen. The target indicates the order. After you touch all marks, the adjusted position data is saved. If you press the HOME button, the previous adjustment position returns. If you press and hold the HOME button, the adjustment is canceled. 8 Press and hold the HOME button. The adjustment results are saved. Adjusting the picture You can adjust the picture for each source and rear view camera. CAUTION For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable these functions, you must stop in a safe place and apply the parking brake. Refer to Important Information for the User (a separate manual). The "System" screen appears. 4 Touch [Picture Adjustment]. 5 Touch any of the following keys to select the function to be adjusted. Picture adjustment items are displayed. Brightness: Adjusts the black intensity. Contrast: Adjusts the contrast. Color: Adjusts the color saturation. Hue: Adjusts the tone of color (which color is emphasized, red or green). Dimmer: Adjusts the brightness of the display. Temperature: Adjusts the color temperature, resulting in a better white balance. p You can adjust Hue only when the color system is set to NTSC. If you touch [Rear View], the mode changes to the selected camera mode. By touching [Source], [Navi] or [Apps], you can return to the selected mode. 6 Touch the following keys to adjust the selected item. Decreases the level of the selected item. Increases the level of the selected item. Selects the adjustable previous item. 51 En