Pioneer AVH-4000NEX Owners Manual - Page 71
Installation
View all Pioneer AVH-4000NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
˙ Using an AUX input This product AUX input OK L VGR L : Left audio (White) L R : Right audio (Red) V : Video (Yellow) R G V G : Ground Yellow Mini-jack AV cable (CD-RM10) (sold separately) Connecting an HDMI device This product Red, white To video output RCA cables (sold separately) To audio outputs HDMI port High Speed HDMI® Cable (sold separately) External video component (sold separately) Notes This mode is available when the setting of AUX input is set to "On". For details, refer to Starting procedure on page 46. When connecting an external video component using a mini-jack AV cable, use a separately sold AUX extension cable as necessary. CAUTION Be sure to use a mini-jack AV cable (CDRM10) (sold separately) for wiring. If you use other cables, the wiring position might differ resulting in disturbed images and sounds. HDMI device (sold separately) Notes For details concerning the operations of HDMI device, refer to Chapter 18. When you connect the High Speed HDMI® Cable, use the lock tie to fix it securely. For details, refer to Securing the High Speed HDMI® Cable on page 70. Connecting the rear display This product Yellow (V OUT) Rear audio output Mini pin plug cable (sold separately) RCA cables (sold separately) To audio inputs To video input Rear display with RCA input jacks ˙ When using a rear display connected to rear video output WARNING NEVER install the rear display in a location that enables the driver to watch the video source while driving. This product's rear video output is for connection of a display to enable passengers in the rear seats to watch the video source. Installation Precautions before installation CAUTION Never install this product in places where, or in a manner that: - Could injure the driver or passengers if the vehicle stops suddenly. Chapter - May interfere with the driver's operation of the vehicle, such as on the floor in 31 front of the driver's seat, or close to the steering wheel or shift lever. English - To ensure proper installation, be sure to use the supplied parts in the manner specified. If any parts are not supplied with this product, use compatible parts in the manner specified after you have the parts' compatibility checked by your dealer. If parts other than supplied or compatible ones are used, they may damage internal parts of this product or they may work loose and the product may become detached. - Do not install this product where it may (i) obstruct the driver's vision, (ii) impair the performance of any of the vehicle's operating systems or safety features, including airbags, hazard lamp buttons or (iii) impair the driver's ability to safely operate the vehicle. - Never install this product in front of or next to the place in the dashboard, door, or pillar from which one of your vehicle's airbags would deploy. Please refer to your vehicle's owner's manual for reference to the deployment area of the frontal airbags. Before installing Consult with your nearest dealer if installation requires drilling holes or other modifications of the vehicle. Before making a final installation of this product, temporarily connect the wiring to confirm that the connections are correct and the system works properly. Installing this product ˙ Installation notes Do not install this product in places subject to high temperatures or humidity, such as: Places close to a heater, vent or air conditioner. Places exposed to direct sunlight, such as on top of the dashboard. 71 En