Ricoh 2020D Operating Instructions - Page 96
Problem, Causes, Solutions
View all Ricoh 2020D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Troubleshooting Problem Causes Solutions The main power indicator continues blinking and does not turn off when pressed. This occurs in the follow- Check if the machine is communi- ing case: cating with a computer. • The machine is communicating with external equipment. Original images are printed on the reverse side of the paper. You may have loaded the paper incorrectly. Load paper correctly. Load paper into Tray 1-4 with the print side up, and bypass tray with the print side down. Misfeeds occur frequently. The tray's side fences may Check the side fences are locked. not be locked. p.88 "Changing the Paper Size". The tray's end fence may Check the end fence is set properly. 4 not be set properly. See p.88 "Changing the Paper Size". You may have loaded pa- When using paper of a size that can- per of a size not shown on not be detected automatically, use the paper size selector. Tray Paper Settings to set the paper size. See p.30 "Tray Paper Size: Tray 1-4" and p.109 "Copy Paper". An error message remains, even if misfed paper is removed. When a misfeed message Clear misfed paper, and then open appears, it remains until and close the front cover. See p.85 you open and close the cov- "x Clearing Misfeeds". er, as required. Cannot print in duplex mode. You cannot use paper in For duplex printing, select Tray 1-4 the bypass tray for duplex in copier mode or with the printer printing. driver. [Off] is selected for[Duplex] Select [On] for [Duplex] in Paper in Paper Type: Tray 1-4. Type: Tray 1-4. See p.31 "Paper Type: Tray 1- 4". You forgot your key opera- - Contact your service representative. tor code. 84