Ricoh Aficio SP 3410DN Hardware Guide - Page 41

❖ Cardstock Item Paper thickness Supported paper tray Duplex supported size Notes ❖ Label paper Item Supported paper tray Duplex supported size Notes ❖ OHP transparencies Item Supported paper tray Duplex supported size Notes Paper Recommendations Description 105 to 160 g/m2 (28.0 to 42.6 lb.) Tray 1 and bypass tray None • The number of sheets that can be printed in one minute is approximately half that of plain paper. • When using 135 g/m2 (35.9 lb.) or heavier paper, prints may be output with strong curls. • When using 135 g/m2 (35.9 lb.) or heavier paper, take prints from the output tray frequently. • Paper thicker than 160 g/m2 cannot be printed onto. 4 Description Tray 1 and bypass tray None • The number of sheets that can be printed in one minute is approximately half that of plain paper. • Avoid using adhesive label paper on which glue is exposed. Glue may stick to the inner parts of the printer, which can cause paper feed problems, deterioration in print quality, or premature wear of the print cartridge's photo conductor unit. Description Bypass tray None • When loading OHP transparencies, take care not to load them upside down. Doing so may cause a malfunction. • It is recommended to place one sheet at a time. • Make sure to fan OHP transparencies every time before printing. Leaving OHP transparencies loaded in the bypass tray may cause them to stick together and result in a misfeed. • If multiple OHP transparencies are fed at the same time, load them one by one. • When printing on OHP transparencies, remove the transparencies one by one as they are output. 37