Ricoh Aficio SP 3410DN Hardware Guide - Page 99

Appendix, Moving and Transporting the Printer, Moving the printer in a short distance

Get Ricoh Aficio SP 3410DN PDF manuals and user guides View all Ricoh Aficio SP 3410DN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 99 highlights

9. Appendix Moving and Transporting the Printer R CAUTION: • The printer weighs approximately 12 kg (26.4 lb.). When moving the printer, use the inset grips on both sides, and lift slowly in pairs. The printer will break or cause injury if dropped. • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine. • When you disconnect the power plug from the wall outlet, always pull the plug (not the cable). • When moving the printer after use, do not take out any of the toners, nor the waste toner bottle to prevent toner spill inside the machine. Repack the printer in its original packing materials for transporting. Important ❒ Be sure to disconnect all cables from the printer before transporting it. ❒ The printer is a precision piece of machinery. Be sure to handle it carefully when moving it. ❒ If the optional paper feed unit is installed, remove it from the printer, and then move them separately. ❒ Do not grip on the tray area when lifting the printer. Moving the printer in a short distance Important ❒ Do not remove the print cartridge when moving the printer. A Be sure to check the following points: • The power switch is turned off. • The power cable is unplugged from the wall outlet. • The interface cable is unplugged from the printer. B If tray 2 is installed, remove it. 95

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
95
9. Appendix
Moving and Transporting the Printer
R
CAUTION:
Repack the printer in its original packing materials for transporting.
Important
❒
Be sure to disconnect all cables from the printer before transporting it.
❒
The printer is a precision piece of machinery. Be sure to handle it carefully
when moving it.
❒
If the optional paper feed unit is installed, remove it from the printer, and
then move them separately.
❒
Do not grip on the tray area when lifting the printer.
Moving the printer in a short distance
Important
❒
Do not remove the print cartridge when moving the printer.
A
Be sure to check the following points:
•
The power switch is turned off.
•
The power cable is unplugged from the wall outlet.
•
The interface cable is unplugged from the printer.
B
If tray 2 is installed, remove it.
•
The printer weighs approximately 12 kg (26.4 lb.). When moving the printer,
use the inset grips on both sides, and lift slowly in pairs. The printer will
break or cause injury if dropped.
•
Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will
not be damaged under the machine.
•
When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
•
When moving the printer after use, do not take out any of the toners, nor
the waste toner bottle to prevent toner spill inside the machine.