Ricoh Aficio SP 3510SF Quick Guide - Page 10

Using the Copier Function Initial Screen and Basic Operation Press the [Start] key. If you are using the SP 3510SF model, depending on the machine's settings, "Set Back Side" appears on the screen when using the exposure glass. • If you want to copy the back side of the original, proceed to the next step. • If you want to end the job, press [ ]. A CMF141 copy will be output. Turn over the original on the exposure glass, and then press the [Start] key. A 2-sided copy will be output, and "Set Front Side" appears on the screen. • If you want to copy the front side of the original again, turn over the original on the exposure glass, and then return to step 4. • If you want to end the job, press [ ]. If a certain period of time passes before you press [ ], the copying may finish automatically. • To cancel photocopying, press the [Copy] key, press the [Clear/Stop] key, and then press [Yes] for confirmation. • You can change the paper tray for the current job by pressing the [ ][ ] keys. You can also select to change the paper tray automatically according to the paper size (A4 or Letter). • You can enable the machine to copy both sides of original with the exposure glass by changing the machine's default setting. For details, see "Configuring the Machine Using the Control Panel", User Guide. • If a paper jam occurs, printing stops after the current page has been printed out. After the jammed paper is removed, printing restarts from the jammed page automatically. • If a scanning jam occurs in the ARDF or ADF, copying is canceled immediately. In this case, copy the originals again starting from the jammed page. • For information about originals, see "Getting Started", User Guide. • For information about removing jammed paper, see "Removing Paper Jams" on page 32. 10