Ricoh Aficio SP 3510SF Quick Guide - Page 454

Error and Status Messages on the Screen Message Cannot copy. Set original to ADF. Check Paper Size Check Paper Type Connection Failed Cover open Dest. is not Programmed Causes Solutions Combined copying/2-sided copying could not be performed because the originals were not placed in the ARDF or ADF. • Use the ARDF or ADF, even when copying a single sheet. • If you need to use the exposure glass, turn off combined copying/2-sided copying in [Duplex/Combine] under copy settings, and then try again. See p.257 "Copy Settings". The paper size set for the document differs from the size of the paper in the indicated tray. Press [FormFeed] to begin printing, or press [JobReset] to cancel the job. The paper type set for the document differs from the type of the paper in the indicated tray. Press [FormFeed] to begin printing, or press [JobReset] to cancel the job. The line could not be connected correctly. • Confirm that the telephone line is properly connected to the machine. • Disconnect the telephone line from the machine, and connect a standard telephone in its place. Confirm that you can make calls using the telephone. If you cannot make calls this way, contact your telephone company. A cover is open. Close the cover completely. No Quick Dial entry is associated with the One Touch button you pressed. • Press a different One Touch button. • Assign a registered destination to the One Touch button. See p.175 "Registering Scan Destinations". 401