Ricoh Aficio SP 3510SF Quick Guide - Page 561
Message, Causes, Solutions, F/W Update NET], F/W Update
View all Ricoh Aficio SP 3510SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 561 highlights
Message -ACHINEISBUSY -ACHINEISNOT ready. -ACHINELOSES communication. 0LEASECHECK&7 5PDATE$ONE Then reboot the -ACHINE .ET5PLOAD%ND of data .ET5PLOAD&!), 53"5PLOAD%ND of data 53"5PLOAD&!), Causes Solutions ,$!0AUTHENTICATIONISENABLED on the machine but you have NOTLOGGEDIN303&30 3&ONLY You must log in to the machine or DISABLETHE,$!0AUTHENTICATION before beginning the firmware upDATE&ORDETAILS SEETHEMANUAL provided with the machine. 4HE53"CABLEISNOTCONNECTED -AKESURETHE53"CONNECTIONBEtween the machine and computer is secure. )FTHISMESSAGEPERSISTS TRYANOTHER53"CABLE 4HE53"PRINTERDRIVERISNOT installed in your computer. )NSTALLTHE53"PRINTERDRIVERIN your computer. The machine is turned off or an error has occurred. Turn the machine's power off, wait a moment, and then turn it back on again. Then perform the update again. )FTHISMESSAGEREAPPEARSAFTER you turn the power back on, see the manuals provided with the machine. 4HE)0ADDRESSSPECIFIEDFOR either the machine or your computer is invalid. #HECKTHATBOTH)0ADDRESSESARE valid. The machine is not connected to Check that the machine is prop- the network properly. erly connected to the network. The firmware update tool is no LONGERABLETOACQUIREUPDATE progress from the machine because the connection between the machine and computer has been terminated. $ISCONNECTINGTHEMACHINEFROM the computer should not interrupt any ongoing update. Check the machine's control panel to see if the update has completed. The firmware has been transferred to the machine successfully. &OLLOWTHEINSTRUCTIONSINTHIS manual to complete the update. The network cable was disconnected immediately after the [F/W Update (NET)] button was clicked. Turn the machine's power off, wait a moment, and then turn it BACKONAGAIN$ISCONNECTANY unnecessary cables from the machine, and then try again. The firmware has been transferred to the machine successfully. &OLLOWTHEINSTRUCTIONSINTHIS manual to complete the update. 4HE53"CABLEWASDISCONNECTED Turn the machine's power off, immediately after the [F/W Update wait a moment, and then turn it (USB)] button was clicked. BACKONAGAIN$ISCONNECTANY unnecessary cables from the ma- chine, and then try again. 12