Ricoh Aficio SP 3510SF Quick Guide - Page 560
Firmware Update Tool Messages, and what action to take when they appear.
View all Ricoh Aficio SP 3510SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 560 highlights
Firmware Update Tool Messages The following table lists the firmware update tool messages that can appear during a firmware update, and explains the likely causes of those messages and what action to take when they appear. -ESSAGESAREALPHABETICALLYORDERED Message Causes Solutions #ANTOPEN2/- FILE0LEASECHECK 2/-FILE The firmware file (*.brn) or setting file (*.ini) is not stored in the same folder as the update tool. .OTETHATTHESETTINGFILEONLY exists when you are using a computer running a Windows operating system.) -AKESURETHATTHEFIRMWAREFILE (*.brn) and setting file (*.ini) are stored in the same folder as the update tool. Also, make sure that you do not modify the setting file. The path to the location of the update tool is too long. -AKESURETHATTHEPATHTOTHE UPDATETOOLISNOTTOOLONG&OR convenience, save the update tool in a subfolder directly under your computer's C: drive. Connecting... Your computer is searching the Wait a while until the machine is network for the machine. found. $OWNLOADEDFILEIS BROKEN$O./4USE print, scan, fax and copy function at the same time. The [F/W Update (USB)] or [F/W Update (NET)] button was clicked while the machine was faxing, printing, scanning, or copying. The firmware file is damaged. Wait for the current job to finish, disconnect any unnecessary cables from the machine, and then try again. $OWNLOADTHEFIRMWAREPACKAGE from our Web site again. &75PDATE$ONE 0LEASEREBOOTTHE -ACHINE The [F/W Update (USB)] or [F/W Update (NET)] button was clicked when the update process was already finished. The update has already successFULLYFINISHED2EBOOTTHEMACHINE to complete the update. -ACHINEISBUSY The machine is being operated through the control panel. Cancel any operations being performed through the control panel. 0UTTHEMACHINEINTOSTANDBY mode, and then perform the update again. s4HEREISANUNSENTFAXINTHE machine's memory. s4HEREISARECEIVEDFAXWAITING to be printed. s3ENDORDELETETHEUNSENTFAX and then try again. s0RINTTHERECEIVEDFAX ANDTHEN try again. The [F/W Update (USB)] or [F/W Update (NET)] button was clicked when the update was already in progress. Clicking the [F/W Update (USB)] or [F/W Update (NET)] button during the update process does not interfere with any ongoing update. )GNORETHISERRORMESSAGEAND complete the update using the procedure shown in this manual. 11