Ricoh Aficio SP 3510SF Quick Guide - Page 324
RX Mode Auto Switch Time, Total No. of Rings TAD
View all Ricoh Aficio SP 3510SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 324 highlights
Fax Feature Settings • Fax Only The machine automatically answers all incoming calls in fax reception mode. • FAX/TEL(Mnl.) The machine rings when it receives incoming calls. The machine receives faxes only when you manually receive faxes. • FAX/TAD The machine receives faxes automatically when a fax call is received. Otherwise, the connected telephone answering device answers the call. • FAX/TEL(Auto) The machine receives faxes automatically when a fax call is received. Otherwise, the machine starts to ring. • Total No. of Rings (TAD) Specifies the number of times the external telephone answering device rings before the machine starts to receive faxes in FAX/TAD mode. Default: 5 times • 1 to 20 times, in increments of 1 • Auto Reduction Sets the machine to reduce the size of a received fax if it is too large to print on a single sheet of paper. Note that the machine only reduces the size down to 74%. If further reduction is required to fit the fax on a single sheet, it will be printed on separate sheets without being reduced. Default: [On] (Default may be [Off] depending on the [Country] setting under [Admin. Tools].) • Off • On • Number of Rings Specifies the number of times the machine rings before it starts to receive faxes in Fax Only mode. Default: 3 times • 3 to 5 times • RX Mode Auto Switch Time Specifies the length of time the machine tries to detect the fax calling tone in FAX/TEL Automatic mode. Default: 15 seconds • 5 to 99 seconds 271