Ricoh Aficio SP 3510SF Quick Guide - Page 451

9. Troubleshooting Problem Solution Cannot receive faxes even when sending them is possible. • A print cartridge is empty. Replace the print cartridge. See p.409 "Replacing the Print Cartridge". • The paper tray is empty. Load paper in the paper tray. See p.96 "Loading Paper". • If fax reception mode is FAX/TEL Manual mode, you must receive the fax manually. See p.240 "Receiving a Fax". Cannot print received faxes. • The paper tray is empty. Load paper in the paper tray. See p.96 "Loading Paper". • The paper tray does not contain paper of the right size. Load paper of the right size in the paper tray. Faxes you sent appear spotty or dirty when received. • The exposure glass or ARDF/ADF is dirty. See p.415 "Cleaning". • Before placing originals on the exposure glass, make sure that ink or correction fluid is dry. A fax you sent appears blank when The original was placed upside down. Place the original in the received. correct orientation. See p.119 "Placing Originals". The background of received images is dirty, or images from the rear side of the originals are visible. Image density is too high. Adjust the image density. See p.222 "Adjusting image density". Faxes you sent come out too light on the receiving end. Low room temperature may have caused the machine to scan originals unclearly. Selecting [Long] for [Scan Warm-up Time] under system settings may help to improve the scanning quality. See p.279 "System Settings". Dial fails when trying to send faxes. See the solutions provided for errors 1XXX22 to 1XXX23 in the above table. 398