Ricoh M 320F Users Guide - Page 265

System Settings (When Using the Touch Panel Model) Low Humidity Mode Item Low Humidity Mode Description Value If the machine is used in a room where humidity level is low, black lines of a few millimeters thick may appear on printouts with 75-millimeter spaces in between. Selecting [On] for this setting may prevent these lines from appearing (wait for about one day until this setting becomes effective). Note that when this setting is enabled, the machine automatically performs self-maintenance in every 10 minutes. • Off • On Default: [Off] Printer Registration Adjust the registration of each tray if necessary. You can adjust the registration value between -15 and +15 (that is, -1.5 and +1.5 mm, in 0.1 mm increments). Default: 0 for all parameters Item Description Horiz.: Tray 1 Select this to adjust the tray 1 registration horizontally. Horiz.: Tray 2 Select this to adjust the tray 2 registration horizontally. Vert.: Tray 1 Select this to adjust the tray 1 registration vertically. Vert.: Tray 2 Select this to adjust the tray 2 registration vertically. Horiz.: Bypass Select this to adjust the bypass tray registration horizontally. Tray Vert.: Bypass Tray Select this to adjust the bypass tray registration vertically. Horiz.: Duplex Select this to adjust the registration of the back of duplex printing horizontally. Unit Vert.: Duplex Unit Select this to adjust the registration of the back of duplex printing vertically. 263