Ricoh M 320F Users Guide - Page 322

7. Configuring the Machine Using the Control Panel Item Reset Settings Shortcut to Function PCL6 Admin. Tools Lock Description Value Be sure not to clear the settings by mistake. • Reset All Settings Resets the machine's settings to their defaults except the following: • Language settings • Network settings Press the [OK] key to execute. Press the [Back] key to exit to the previous level of the menu tree without clearing the settings. • Reset Network Settings Resets the network settings to their defaults. Press the [OK] key to execute. Press the [Back] key to exit to the previous level of the menu tree without clearing the settings. Assigns one of the following functions to the [Shortcut to Func.] key on the control panel. • ID Card Copy Mode • Select Scanner Address Default: [ID Card Copy Mode] Set this to [Universal] when using the Universal Driver and to [P 310/M 320] when using the normal driver. • P 310/M 320 • Universal Default: [P 310/M 320] Specifies an eight-digit password for accessing the [Network Settings], [Network Wizard], and [Admin. Tools] menus. The password must be specified during the Initial Setup, which is required after turning on the machine for the first time. For details, see Setup Guide. Do not forget this password. The default password is "00000000". • On (00000000 to 99999999) • Off Default: [On] 320