Samsung SRP-275CEPG Operation Manual - Page 100

CHAPTER 5 CONTROL COMMANDS LIST BEL [Name] External device 1 drive instruction [Format] ASCII BEL Hex 07 Decimal 7 [Range] ------ [Description] Executes the external device drive conditions set according to the ESC BEL (external device drive pulse width setting command). As with other commands, this command temporarily stores data in the data buffer, then executes in the order received. [Note] External device 1 and external device 2 cannot be executed simultaneously. FS [Name] External device 1 drive instruction (real time) [Format] ASCII FS Hex 1C Decimal 28 [Range] ------ [Default] ------ [Description] Executes the external device drive conditions set according to the ESC BEL (external device drive pulse width setting command). The printer executes this command immediately upon reception. [Note] External device 1 and external device 2 cannot be executed simultaneously. 5-108 SUB [Name] External device 2 drive instruction (real time) [Format] ASCII SUB Hex 1A Decimal 26 [Range] ------ [Default] ------ [Description] Drives external device 2. The energizing time and delay time are fixed at 200 ms each. The printer executes this command immediately upon reception. This command is the same as the EM command. [Note] External device 1 and external device 2 cannot be executed simultaneously EM [Name] External device 2 drive instruction (real time) [Format] ASCII EM Hex 19 Decimal 25 [Range] ------ [Default] ------ [Description] Drives external device 2. The energizing time and delay time are fixed at 200 ms each. The printer executes this command immediately upon reception. This command is the same as the SUB command. [Note] External device 1 and external device 2 cannot be executed simultaneously. 5-109