Samsung SRP-275CEPG Operation Manual - Page 94
ESC Q n, ESC l n
View all Samsung SRP-275CEPG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
CHAPTER 5 CONTROL COMMANDS LIST ESC l n Name] Set left margin [Format] ASCII ESC l n Hex 1B 6C n Decimal 27 108 n [Range] 0 ≤ n ≤ (Right margin -2) ≤ 255 [Default] n = 0 [Description] This command sets the left margin (current ANK character pitch x n) using the left edge as a reference after printing data in the line buffer. Upside-down printing uses the same left edge as a reference. Setting this command partway will print the data in the line buffer at that point and perform a line feed. It will take affect from the next line. Character spacing is included in the character pitch but is unaffected by expansion settings. The left margin set using this command is unaffected by changing the character pitch after being set. The left margin must be at least a minimum of 18 dots with the right margin (*1). If the printable region as set by the left and right margins is smaller than one character, including the space between characters, printing is not possible. (*1) More than 4 characters of 7 x 9 fonts, and more than 3 characters in 9 x 9 fonts (when character space = 0). ESC Q n [Name] Set right margin [Format] ASCII ESC Q n Hex 1B 51 n Decimal 27 81 n [Range] 2 ≤ n ≤ Maximum printable digits ≤ 255 [Default] Maximum printable digits [Description] This command sets the printable region (current ANK character pitch x n) using the left edge as a reference after printing data in the line buffer. Upside-down printing uses the same left edge as a reference. Setting this command partway will print the data in the line buffer at that point and perform a line feed. It will take affect from the next line. Character spacing is included in the character pitch but is unaffected by expansion settings. The right margin set using this command is unaffected by changing the character pitch. The printable region within the defined range must be at least a minimum of 18 dots for the right margin (*1). If the printable region as set by the left and right margins is smaller than one character, including the space between characters, printing is not possible. (*1) More than 4 characters of 7 x 9 fonts, and more than 3 characters in 7 x 9 fonts (when character space = 0). 5-96 5-97