Samsung SRP-275CEPG Operation Manual - Page 52
ESC v, ESC u
View all Samsung SRP-275CEPG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
CHAPTER 5 CONTROL COMMANDS LIST ESC u [Name] [Format] [Range] [Default] [Notes] Transmit peripheral device status. ASCII ESC u n Hex 1B 75 n Decimal 27 117 n n = 0, 48 Transmit the peripheral device status of 1 byte. The peripheral device to be transmitted is as follows: Bit Binary Hex Decimal Status 0 0 1 00 01 1-3 - - 4 0 00 5,6 - - 7 0 00 0 Drawer kick-out connector pin 3 LOW. 1 Drawer kick-out connector pin 3 is HIGH. - Undefined. 0 Not used. Fixed to Off. - Undefined. 0 Not used. Fixed to Off. ESC v [Name] Transmit peripheral device status. [Format] ASCII ESC v Hex 1B 76 Decimal 27 118 [Description] Transmit the status of paper sensor(s) as 1 byte of data. [Notes] See GS r for details on status transmission. The peripheral device status to be transmitted is as follows: Bit Binary Hex Decimal Status 0,1 00 11 00 03 2,3 00 11 00 0C 4 0 00 5,6 - - 7 Off 00 0 Paper near end sensor: paper adequate. 3 Paper near end sensor: paper near end. 00 Paper end sensor: paper present. 12 Paper end sensor: paper not present. 0 Not used. Fixed to Off. - Undefined. 0 Not used. Fixed to Off. When the paper end sensor detects a paper-end, the printer goes offline and does not execute this command. Therefore, bits 2 and 3 of the paper sensor status do not transmit a paper-end status. 5-34 5-35