Samsung SRP-275CEPG Operation Manual - Page 87

CHAPTER 5 CONTROL COMMANDS LIST ESC - n [Name] Specify/cancel underline mode [Format] ASCII ESC - n Hex 1B 2D n Decimal 27 45 n [Range] n = 0, 1, 48, 49 [Default] n = 0 (Underline cancelled) [Description] Specifies underline according to the n value. n Function 0, 48 Cancel underline 1, 49 Specify underline Underlines are applied to the dot of the character. Underlines are not applied to horizontal tabs and to specified horizontal direction positions. When double-wide expanded characters have been specified, the underline is also expanded, but if double-high expanded characters have been selected, the underline does not expand in the vertical direction. It remains a one-dot line. ESC _ n [Name] Specify/cancel upperline [Format] ASCII ESC Hex 1B _ n 5F n Decimal 27 95 n [Range] n = 0, 1, 48, 49 [Default] n = 0 (Upperline cancelled) [Description] Specifies upperline according to the n value. n Function 0, 48 Cancel upperline 1, 49 Specify upperline 5-82 Upperlines are applied to the dot of the character. Upperlines are not applied to horizontal tabs and to specified horizontal direction positions. When double-wide expanded characters have been specified, the upperline is also expanded, but if double-high expanded characters have been selected, the upperline does not expand in the vertical direction. It remains a one-dot line. ESC 4 Name] [Format] [Range] [Default] [Description] Specify white/black inversion and red color printing ASCII ESC 4 Hex 1B 34 Decimal 27 52 ------ White/black inversion cancelled/black color printing specified The following shows the details of this command. - Specifies white/black inverted printing Subsequent characters are printed, including the character pitch, with white and black inverted. Cautions when using this command: 1) This command is enabled for ANK characters only. White/black is not inverted for Chinese characters and block graphic characters. 2) Do not use when ANK fonts are set to 5 x 9 (3P=1). (Print quality is not guaranteed.) - Specifies red color printing (Set DIP Switch 1-4 to "ON") Subsequent characters are printed in red. Red and black characters can be mixed on the same line. This command is enabled for all print data (ANK characters, Chinese characters and bit images). ESC 5 [Name] [Format] [Range] [Default] [Description] Cancel white/black inversion/specify black color printing ASCII ESC 4 Hex 1B 35 Decimal 27 53 ------ Cancel white/black inverted printing/specify black printing The following shows the details of this command. They vary according to the model. - Cancels white/black inverted printing - Specifies black color printing Cancels red color printing and prints subsequent data in black. 5-83