Samsung SRP-275CEPG Operation Manual - Page 73
Commands list for CITIZEN mode iDP3550/3551
View all Samsung SRP-275CEPG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
5.4.5 Commands list for CITIZEN mode (iDP3550/3551) n Command Description Hex 1 FF n n-line paper feed (CBM1 mode) 0C n 2 FF Form feed (CBM2 mode) 0C 3 SO (Note) Specifying the double width character (CBM1 mode) 0E 4 SI (Note) Canceling the double width character 0F 5 LF Print and paper feed 0A 6 CR Printing 0D 7 DC1 (Note) Initializing the printer (CBM1 mode) 11 8 DC2 (Note) Specifying/Canceling the inverted character(CBM1 mode) 12 9 DC3 (Note) Specifying the red print (CBM1 mode) 13 10 CAN Canceling the print data 18 11 ESC * n1 n2 Specifying the bit image mode 1B 2A n1 n2 12 ESC - n Specifying/Canceling the Underline 1B 2D n 13 ESC 1 Specifying 1/9-inch line feed width 1B 31H 14 ESC 2 Specifying 2/9-inch line feed width 1B 32 15 ESC 3 Specifying standard line feed width 1B 33 16 ESC C n Setting the page length 1B 43 n 17 ESC N n Specifying the perforation skip 1B 4E n 18 ESC O Canceling the perforation skip 1B 4F 19 ESC f 1 Form feed (Changing the page) 1B 66 01 20 ESC t n Selecting the character code table 1B 74 n 21 ESC BEL n1 n2 Setting the external device drive pulse width 1B 07 n1 n2 22 BEL Driving command A for Drawer-1 07 23 FS Driving command B for Drawer-1 1C 24 SUB Driving command for Drawer-2 1A 25 RS Buzzer-on 1E 26 ESC P 0 Partial cut 1B 50 00 27 ESC P 1 Partial cut 1B 50 01 28 ESC R n Selecting the international character set 1B 52 n 29 ESC & 0 n1 n2 Defining the download character set 1B 26 00 n1 n2 30 ESC % n Specifying/Canceling the download character 1B 25 n 31 ESC / n Defining the message 1B 2F n 32 ESC DC3 n Printing the message 1B 13 n 33 ESC y n Setting the print lines after paper near end detection 1B 79 n 34 ESC DC2 n1 n2 Deleting the download character, message, bit image 1B 12 n1 n2 35 GS * n1 n2 Defining the download bit image 1D 2A n1 n2 36 GS / m Printing the download bit image 1D 2F m Effective when CBM mode is selected with the DIP Switch segments 1-1 and 1-2 and CMB1 (OFF) is selected with the DIP Switch segment 1-4. If CBM2 (ON) is selected with the DIP Switch segment 1-4, the functions of these commands are changed as shown in the table below. 5-123