Samsung SRP-275CEPG Operation Manual - Page 47
ESC U, ESC a, ESC M, ESC R
View all Samsung SRP-275CEPG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
CHAPTER 5 CONTROL COMMANDS LIST ESC M [Name] Select character font [Format] ASCII ESC Hex 1B M n 4D n Decimal 27 77 n [Range] [Default] n = 0, 1, 48, 49 n = 1 [Description] Selects a character font, using n as follows : n Font 0, 48 Font A(9 x 9) 1, 49 Font B(7 x 9) [Notes] The settings of this command are effective until ESC ! is executed, ESC @ is executed, the printer is reset, or the power is turned off. ESC R [Name] Select an international character set [Format] ASCII ESC R n Hex 1B 52 n Decimal 27 82 n [Range] 0 ≤ n ≤ 10 [Default] n = 0 [Description] Selects an international character set n as follows : n Character set 0 U.S.A. 1 France 2 Germany 3 U.K. 4 Denmark I 5 Sweden 6 Italy 7 Spain I 8 Japan 9 Norway 10 Denmark II 5-24 ESC U [Name] [Format] [Range] [Default] [Description] [Notes] Turn unidirectional printing mode on / off ASCII ESC U n Hex 1B 55 n Decimal 27 85 n 0 ≤ n ≤ 255 n = 0 Turns unidirectional printing mode on or off. - When the LSB of n is 0, unidirectional printing mode is turned off. - When the LSB of n is 1, unidirectional printing mode is turned on. When unidirectional printing mode is turned off, bidirectional printing mode is automatically turned on. Unidirectional printing mode can be turned on when printing double-height characters or graphics or bit image or two dimension code to ensure that the top and bottom of the printing patterns are aligned. The settings of this command are effective until ESC @ is executed, the printer is reset, or the power is turned off. ESC a [Name] [Format] [Range] [Default] [Description] Select justification ASCII ESC a n Hex 1B 61 n Decimal 27 97 n 0 ≤ n ≤ 2, 48 ≤ n ≤ 50 n = 0 Aligns all the data in one line to a specified position, using n as follows : n Justification 0, 48 Left justification 1, 49 Centering 2, 50 Right justification [Notes] This command is enabled only when processed at the beginning of the line This command justifies printing data (such as characters, all graphics) and space area set by HT. The settings of this command are effective until ESC @ is executed, the printer is reset, or the power is turned off. 5-25