Samsung SRP-275CEPG Operation Manual - Page 79

CHAPTER 5 CONTROL COMMANDS LIST ESC t n [Name] Selecting the character code table [Format] ASCll ESC tn Hex 18 74 n [Range] 0 ≤ n ≤ 30 [Description] This command selects code-page. [Default] Depends upon DIP Switch setting. n Page 0 PC437 1 Katakana 2 PC850 3 PC860 4 PC863 5 PC865 16 WPC1252 17 PC866 18 PC852 19 PC858 21 PC862 22 PC864 23 Thai character code 42 24 WPC1253 25 WPC1254 26 WPC1257 27 Farsi 28 WPC1251(*1) 29 PC737(*1) 30 PC775(*1) (*1) Only Font B available. 5-134 ESC BEL n1 n2 [Name] Setting the external device drive pulse width [Format] ASCII ESC BEL n1 n2 Hex 1B 07 n1 n2 [Range] 1 ≤ n1, n2 ≤ 127 [Description] This command sets the power-on time to drive an external device (such as cash drawer). Power-on time = n1 x 10 (ms) Delay time = n2 x 10 (ms) To actually drive the drawer, use the BEL and FS commands. [Default] n1 = n2 = 20 BEL [Name] Driving command A for drawer-1 [Format] ASCII BEL Hex 07 [Description] This command drives the drawer connector No.2 pin under the condition set with the ESC BEL n1 n2 command. This command is executed in order of entry into the input buffer. 5-135