Samsung SRP-275CEPG Operation Manual - Page 76

CHAPTER 5 CONTROL COMMANDS LIST DC1 [Name] Setting the select mode [Format] ASCII DC1 Hex 11 [Description] This command sets the printer in the selecting status. (CBM2 Mode) DC2 (CBM1 Mode) [Name] Specifying/Canceling the inverted character [Format] ASCII DC2 Hex 12 [Description] This command selects/deselects the inverted characters. Enter this command at the beginning of one line. Otherwise, it is overridden. Erect and inverted characters cannot be mixed in one line. DC2 (CBM2 Mode) [Name] Specifying the red print [Format] ASCII DC2 Hex 12 [Description] This command specifies red-color characters. All the characters in one line are printed in red by prefixing the print data with this command and sending it to the printer. When you want to use red characters, use this command for each line. 5-128 DC3 (CBM1 Mode) [Name] Specifying the red print [Format] ASCII DC3 Hex 13 [Description] This command specifies red-color characters. All the characters in one line are printed in red by prefixing the print data with this command and sending it to the printer. When you want to use red characters, use this command for each line. DC3 (CBM2 Mode) [Name] Setting the deselect character [Format] ASCII DC3 Hex 13 [Description] This command sets the printer in the deselecting status in which the printer cannot receive data. To set the printer in the selecting status, use DC1. CAN [Name] Canceling the print data [Format] ASCII CAN Hex 18 [Description] This command clears the print data in the lines entered prior to this command. 5-129