Samsung SRP-275CEPG Operation Manual - Page 81

CHAPTER 5 CONTROL COMMANDS LIST ESC & n1 n2 [m0 m1 m5 m6 m7 m8 m9] n2 - n1 +1 [Name] Defining the download character set [Format] ASCII ESC & n1 n2 [m0 m8 m9] n2-n1+1 Hex 1B 26 00 n1 n2 [m0 m8 m9] n2-n1+1 [Range] 32 ≤ n1 ≤ n2 ≤ 255, m0 = 0 or m0 = 128 [Description] This command defines he download characters. n1 is a character code to start definition and n2 is to end definition, respectively. When defining only one character, set n1 = n2. You can define the ASCII codes ranging from 32 to 255. Once the download characters are defined, they remain valid until they are redefined or the download deletion command (ESC DC2 n1 n2) is executed. 5-138 ESC % n [Name] Specifying/Canceling the download character set [Format] ASCII ESC % n Hex 1B 25 n [Description] This command selects/deselects the download character set. The download characters cannot be printed by simply defining them with the abovementioned ESC & 0 command. To print them, send this command to the printer. n Download Character Set 0 Deselect 30 1 31 Select ESC / n "data" CR or LF [Name] Defining the message [Format] ASCII ESC / n Hex 1B 2F n [Range] 1 ≤ n ≤ 10 [Description] This command can define up to a 50-byte message in one line. If the value of n is specified beyond the range, the data following n will be treated as the print data. Once the message is defined, it remains valid until it is redefined. The data should end with CR (0DH) or LF (0AH). If the data exceeds 50 bytes, the subsequent data will be treated as the print data. Once the message is defined, it remains valid until it is redefined or the download deletion command (ESC DC2 n1 n2) is executed. 5-139