Samsung SRP-275CEPG Operation Manual - Page 41

DLE DC4 fn = 1, ESC SP

Get Samsung SRP-275CEPG - Bixolon Two-color Dot-matrix Printer PDF manuals and user guides View all Samsung SRP-275CEPG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

CHAPTER 5 CONTROL COMMANDS LIST DLE DC4 (fn = 1) [Name] Generate pulse at real-time [Format] ASCII DLE DC4 n m t Hex 10 14 n m t Decimal 16 20 n m t [Range] n = 1 m = 0, 1 1≤t≤8 [Description] Outputs the pulse specified by t to connector pin m as follows in real time: m Connector pin 0 Drawer kick-out connector pin 2 1 Drawer kick-out connector pin 5 The pulse ON time is [ t x100 ms] and the OFF time is [ t x100 ms] [Notes] This is a real-time command that the printer executes upon receiving it. Note the following when using this command. -If this command is embedded within the code string of another command, it is processed as a parameter of the other command, and the print result is not correct. -If another command (such as bit image or defined data) has a code string in a parameter that is the same as this command, the printer starts processing this command. This command is ignored in the following states: -In error status -When the pulse is being output to the connector pin (during processing of ESC p and DLE DC4) -During transmission of block data (Header ~ NUL) -When this command is disabled by GS (D) 5-12 ESC SP [Name] Set right-side character spacing [Format] ASCII ESC SP n Hex 1B 20 n Decimal 27 32 n [Range] 0 ≤ n ≤ 255 [Default] n = 0 [Description] Sets the right-side character spacing to n x (horizontal or vertical motion unit). [Notes] - When characters are enlarged, the character spacing is n times normal value. The character spacing for double-width mode is twice the normal value. ESC ! [Name] [Format] Select print mode(s) ASCII ESC ! n Hex 1B 21 n Decimal 27 [Range] 0 ≤ n ≤ 255 [Default] n = 1 33 n [Description] Selects or cancels print modes collectively (emphasized, double-height, double-width, underline) using n as follows: Bit Off/On Hex Decimal Status Off 00 0 On 01 Character font A(9x9)selected Character font B(7x9) selected 1,2 - - - Undefined 3 Off 00 On 08 0 Emphasized mode not selected 8 Emphasized mode selected 4 Off 00 0 Double-height mode not selected On 10 16 Double-height mode selected Off 00 0 Double-width mode not selected 5 On 20 32 Double-width mode selected 6 Off - - Undefined Off 00 0 Underline mode not selected 7 On 80 128 Underline mode selected 5-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
5-13
5-12
DLE DC4 (fn = 1)
[Name]
Generate pulse at real-time
[Format]
ASCII
DLE
DC4
n
m
t
Hex
10
14
n
m
t
Decimal
16
20
n
m
t
[Range]
n = 1
m = 0, 1
1
≤
t
≤
8
[Description]
Outputs the pulse specified by t to connector pin m as follows in real time:
[Notes]
This is a real-time command that the printer executes upon receiving it.
Note the following when using this command.
-If this command is embedded within the code string of another command,
it is processed as a parameter of the other command, and the print result is
not correct.
-If another command (such as bit image or defined data) has a code string in
a parameter that is the same as this command, the printer starts processing
this command.
This command is ignored in the following states:
-In error status
-When the pulse is being output to the connector pin
(during processing of ESC p and DLE DC4)
-During transmission of block data (Header ~ NUL)
-When this command is disabled by GS (D)
The pulse ON time is [ t x100 ms] and the OFF time is [ t x100 ms]
m
0
1
Connector pin
Drawer kick-out connector pin 2
Drawer kick-out connector pin 5
ESC SP
[Name]
Set right-side character spacing
[Format]
ASCII
ESC
SP
n
Hex
1B
20
n
Decimal
27
32
n
[Range]
0
≤
n
≤
255
[Default]
n = 0
[Description]
Sets the right-side character spacing to n x (horizontal or vertical motion unit).
[Notes]
- When characters are enlarged, the character spacing is n times normal value.
The character spacing for double-width mode is twice the normal value.
ESC !
[Name]
Select print mode(s)
[Format]
ASCII
ESC
!
n
Hex
1B
21
n
Decimal
27
33
n
[Range]
0
≤
n
≤
255
[Default]
n = 1
[Description]
Selects or cancels print modes collectively (emphasized, double-height,
double-width, underline) using n as follows:
Bit
Off/On
Hex
Decimal
Status
1,2
6
Off
On
-
Off
On
Off
On
Off
On
Off
Off
On
00
01
-
00
08
00
10
00
20
-
00
80
-
0
8
0
16
0
32
-
0
128
Character font A(9x9)selected
Character font B(7x9) selected
Undefined
Emphasized mode not selected
Emphasized mode selected
Double-height mode not selected
Double-height mode selected
Double-width mode not selected
Double-width mode selected
Undefined
Underline mode not selected
Underline mode selected
CONTROL COMMANDS LIST
CHAPTER 5
0
3
4
5
7