Samsung SRP-275CEPG Operation Manual - Page 80

CHAPTER 5 CONTROL COMMANDS LIST FS [Name] Driving command B for drawer-1 [Format] ASCII FS Hex 1C [Description] This command drives the drawer connector No. 2 pin under the condition set with the ESC BEL n1 n2 command. SUB [[Name] Driving command for drawer-2 [Format] ASCII SUB Hex 1A [Description] As soon as this command is received, the drawer connector No. 5 pin is driven. The power-on time is 200 ms ON and 200 ms OFF stationary. The drawers 1 and 2 cannot be driven simultaneously. RS [Name] Buzzer-on [Format] ASCII RS Hex 1E [Description] This command emits a short warning sound from the printer. 5-136 ESC P [Name] Partial cut [Format] ASCII ESC P Hex 1B 50 00 [Description] This command partially cuts the paper ESC P [Name] Partial cut [Format] ASCII ESC P Hex 1B 50 01 [Description] This command partially cuts the paper ESC R n [Name] [Format] [Range] [Description] Selecting the international character set ASCII ESC R n Hex 1B 52 n 0 ≤ n ≤ 10 Selects a page n from the character code table. n Character Set 0 U.S.A. 1 France 2 Germany 3 U.K. 4 Denmark I 5 Sweden 6 Italy 7 Spain 8 Japan 9 Norway 10 Denmark II 5-137