Samsung SRP-275CEPG Operation Manual - Page 89

CHAPTER 5 CONTROL COMMANDS LIST LF Name] Line feed [Format] ASCII LF Hex 0A Decimal 10 [Range] ------ [Default] Set line feed to 1/6 inch [Description] After printing data in the line buffer, paper is fed according to the currently set line feed amount. CR [Name] [Format] Carriage return (line feed) ASCII CR Hex 0D Decimal 13 [Range] [Default] [Description] ------ Set line feed to 1/6 inch Specifies the function according to the memory switch value. MSW Condition 1 Condition 2 Condition 3 Function Ignored Same as the LF code Executes only printing, with no paper feed. 5-86 ESC a n [Name] Feed paper n lines [Format] ASCII ESC a n Hex 1B 61 n Decimal 27 97 n [Range] 1 ≤ n ≤ 127 [Default] ------ [Description] After printing data in the line buffer, paper is fed according to the currently set line feed amount x n. Line feed amount is unaffected even if double-high characters and double-high/wide characters exist in the same line. ESC 0 [Name] Set line feed to 1/8 inch [Format] ASCII ESC 0 Hex 1B 30 Decimal 27 48 [Range] ------ [Default] 1/6 inch [Description] Sets subsequent line feeds to 1/8 inch. 5-87