Samsung SRP-275CEPG Operation Manual - Page 83

CHAPTER 5 CONTROL COMMANDS LIST GS * n1 n2 [d] n1xn2x8 [Name] Defining the download bit image [Format] ASCII GS * n1 n2 m [d] n1xn2x8 Hex 1D 2A n1 n2 m [d] n1xn2x8 [Range] 1 ≤ n1 ≤ 45 0 ≤ n2 ≤ 24 Note) Take care that the number of data (n1 x n2 x 8) is equal to or smaller than 2,048. [Description] This command defines the download bit image having the dots specified n1 and n2. The number of horizontal dots is represented by n1 8 and that of vertical dots is represented by n2 x 8, respectively. m denotes the number to be registered. (See a download bit image printout.) d denotes the bit image data. Once the download bit image is defined, it remains valid until it is redefined or the download deletion command (ESC DC2 n1 n2) is executed. GS / m [Name] Printing the download bit image [Format] ASCII GS / m Hex 1D 2F m [Range] 0 ≤ m ≤ 255 [Description] This command prints the bit image saved in the number specified with m. [Notes] If the print buffer contains the data, this command will be ignored. If the bit image has not been saved in the specified number, this command will be ignored. Nothing is printed when m is other 5-142 5-143