Samsung SRP-275CEPG Operation Manual - Page 51

CHAPTER 5 CONTROL COMMANDS LIST ESC r [Name] Select print color [Format] ASCII ESC r n Hex 1B 72 n Decimal 27 114 n [Range] n = 0, 1, 48, 49 [Default] n = 0 [Description] Selects a print color, using n as follows: n Selected color 0, 48 Black 1, 49 Red [Notes] This command is enabled only when processed at the beginning of the line. This command is effective until ESC @ is executed, the printer is reset, or the power is turned off. 5-32 ESC t [Name] Select paper sensor(s) to output paper-end signals [Format] ASCII ESC t n Hex 1B 74 n Decimal 27 116 n [Range] n = 0, 1, 2, 3, 4, 5, 16, 17, 18, 19, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 255 [Default] n = 0 [Description] Selects a page n from the character code table. [Notes] n Page 0 PC437 1 Katakana 2 PC850 3 PC860 4 PC863 5 PC865 16 WPC1252 17 PC866 18 PC852 19 PC858 21 PC862 22 PC864 23 Thai character code 42 24 WPC1253 25 WPC1254 26 PC1257 27 Farsi 28 WPC1251(*1) 29 PC737(*1) 30 PC775(*1) The alphanumeric characters (20H (decimal 32) to 7FH (decimal 127)) are the same for each page. The executed characters (80H (decimal 128) to FFH (decimal 225)) are different for each page. The selected characters code table is effective until ESC @ is executed, the printer is reset, or the power is turned off. n = 255; default code page. (*1) Only Font B available. 5-33