SanDisk SDSDH-1024 Product Manual - Page 82
Card State Transition
UPC - 710348911073
View all SanDisk SDSDH-1024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Revision 2.2 Chapter 4 - SD Card Protocol Description SanDisk SD Card Product Manual ACMD Index ACMD42 Type Argument Resp. ac [31:1] stuff R1 bits [0] set_cd Abbreviation SET_CLR_CARD_DETECT ACMD43 ACMD49 ACMD51 --- --- --- adtc [31:0] stuff R1 bits --SEND_SCR Command Description Connect[1]/Disconnect[0] the 50KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. Reserved for SD security applications. Reads the SD Configuration Register (SCR). 4.9 Card State Transition Table 4-18 defines the SD card state-transition (dependent on the received command). The SD Card application-specific command state-transitions can be found in Class 8. Table 4-18 Card State Transition Table Current Status idle ready ident stby tran data rcv prg dis ina State Change Trigger Changes to Class Independent "Operation --- --- --- --- --- --- --- tran stby --- complete" Class 0 CMD0 idle idle idle idle idle idle idle idle idle --- CMD2 --- ident --- --- --- --- --- --- --- --- CMD3 --- --- stby stby --- --- --- --- --- --- CMD4 --- --- --- stby --- --- --- --- --- --- CMD7, card is --- --- --- tran --- --- --- --- prg --- addressed CMD7, card is --- --- --- stby stby stby --- dis --- --- not addressed CMD9 --- --- --- stby --- --- --- --- --- --- CMD10 --- --- --- stby --- --- --- --- --- --- CMD12 --- --- --- --- --- tran prg --- --- --- CMD13 --- --- --- stby tran data rcv prg dis --- CMD15 --- --- --- ina ina ina ina ina ina --- Class 2 CMD16 CMD17 CMD18 --- --- --- --- tran --- --- --- --- --- --- --- --- --- data --- --- --- --- --- --- --- --- --- data --- --- --- --- --- Class 4 CMD16 see class 2 © 2004 SanDisk Corporation 4-38 12/08/04