Sony DCR-TRV50 Operating Instructions (primary manual) - Page 11
Recording a still image on Memory Stick, Monitoring the playback still image on the LCD, screen
View all Sony DCR-TRV50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Quick Start Guide Recording a still image on "Memory Stick" (p. 126) 1 Remove the lens cap. 3 Press OPEN to open the LCD panel. The picture appears on the screen. 2 Set the POWER switch to MEMORY/ NETWORK (DCRTRV50 only) while pressing the small green button. Make sure that the LOCK switch is set to the left (unlock) position. Viewfinder When the LCD panel is closed, use the viewfinder with your eye against the eyecup. Adjust the viewfinder lens to your eyesight (p. 30). POWER VCR OFF(CHG) CAMERA MEMORY/ NETWORK 4 Press PHOTO lightly. 5 Press PHOTO deeper. When you purchase your camcorder, the clock setting is set to off. If you want to record the date and time for a picture, set the clock setting before recording (p. 20). Monitoring the playback still image on the LCD screen (p. 156) 1 Set the POWER switch to MEMORY/ NETWORK (DCR-TRV50 only) or VCR while pressing the small green button. POWER VCR OFF(CHG) CAMERA MEMORY/ NETWORK 2 Press PLAY or PB. The last recorded image is displayed. PLAY or PB NOTE Do not pick up your camcorder by holding the viewfinder, the flash, the LCD panel or the battery pack. 11