Sony DCR-TRV50 Operating Instructions (primary manual) - Page 202

Changing the default settings with the menu Icon/item VCR SET HiFi SOUND Mode z STEREO 1 2 AUDIO MIX -- Meaning POWER switch To play back a stereo tape or dual sound track tape with main and sub sound (p. 221) To play back a stereo tape with the left sound or a dual sound tape with main sound To play back a stereo tape with the right sound or a dual sound track tape with sub sound To adjust the balance between the stereo 1 and stereo 2 (p. 109) VCR VCR ST1 ST2 A/VtDV OUT z OFF To output digital images and sound in analog format using your camcorder ON To output analog images and sound in digital format using your camcorder (p. 196) LCD/VF SET LCD B.L. z BRT NORMAL To set the brightness on the LCD screen to normal BRIGHT To brighten the LCD screen VCR VCR CAMERA MEMORY/ NETWORK LCD COLOR -- To adjust the color on the LCD screen, turn the SEL/PUSH EXE dial. To get lowintensity To get highintensity VCR CAMERA MEMORY/ NETWORK VF B.L. z BRT NORMAL To set the brightness on the viewfinder screen to normal BRIGHT To brighten the viewfinder screen VCR CAMERA MEMORY/ NETWORK Notes on LCD B.L. and VF B.L. •When you select BRIGHT, battery life is reduced by about 10 percent during recording. •When you use power supplies other than the battery pack, BRIGHT is automatically selected. Even if you adjust LCD B.L., LCD COLOR and/or VF B.L. The recorded picture will not be affected. 202